Accessories and spare parts milling machines
Chain mortising machines
Copy milling machines
End milling machines
Form milling machines
Profile milling machines
Rotary / Carousel-mills
Shutter milling machine
Slot milling machines
Stairs milling machines
Tap milling machines
Tilting spindle moulders
spindle moulder with tillable spindle guaranteed quality at your finger tips - easy-to-use the operator easily adjusts all movements due to a hand wheel with mechanical decimal readouts located on the front of the machine. spindle speed readout via LED's left right turning of spindle spindle moulder fence with manual adjustment machine in version 'LL' with left and right table elongation (2500 mm), pull - out work piece support and emergency stop button carriage on work table for tenoning wo...
Double spindle milling machine, table milling machine, double spindle milling machine, table milling machine, wood milling machine -Saw blade holder: Ø 60 mm -Power of 2 motors: 22 KW each -Milling/sawing spindles adjustable: in height 25 mm -Milling/sawing spindles adjustable: 65 mm on each side -Board width: max. 150 mm -Bed height: max. 50 mm -Table height with castors 920 mm/without castors 800 mm -Machine: does not have its own feed but only has hold-down devices -Hold down: pneum...
Used machine Rigid tiller Engine 4 kW Spindle diameter 30 mm 2200/4400/6000/8000/10000 rpm with Panhans precision milling fence with metal jaws with 3 rolls feed unit Availability: short term Location:Hochheim Bxt9ao078x
Technical characteristics table 905 x 765 mm 2-speed motor 2.2 / 3.3 kW rotation speed 10000/20000 rpm vertical shaft stroke 100 mm vertical stroke of the table 200 mm Power and Motors Pkt3j Overall dimensions
The manual milling machine Omec 650-M is utilised to indent dovetails for drawers and various furniture elements. The machine is equipped with a mill spindle which allows cutting of indents of adjustable height. The machine can cut four types of indents with different pitches. Locking and unlocking of pieces takes place manually by means of eccentric ar- bores. The controls are realised with a magnetothermic switch that is directly installed on the terminal board of the motor, and lever hand whe...
Table milling machine, table milling machine P83mh2s -Table milling machine: with rigid spindle -Feed: Holz-Her 3 rolls -Speeds: 3,000, 5,000, 6,000, 10,000 rpm -Dimensions: 1220/770/H1650 mm -Weight: 588 kg
- NEW - Manufacturer Ruwi Type M Base 3 Technical specifications: - stepless speed control v. 8000-25000U / min - Control electronics prevent speed fluctuations under load - Overload protection and PTC thermal monitoring - robust and highly loadable engine with 1050 W for industrial use - Made in Germany - Soft start and start current limiter Jw00vi - Voltage 230 V - Milling spindle with 22 mm diameter and counter- continuous return thread for dirt protection, precise double bearing for highly ...
Technische Daten: - CNC Steuerung mit bedienfreundlicher Touchscreen Bedienung - min./max. Arbeitslänge 250 - 1200 mm - min./max. Arbeitsbreite 10 - 115 mm - min./max. Arbeitshöhe 10 - 60 mm - max. Zapfen Länge 70 mm - Drehzahl Fräse 12.000 U/Min. - Spindeldurchmesser 30 mm 2wommuo - Motorleistung Fräse 2 x 3,7 Kw - X-Achse Servo-Motor 2 x 1,0 kW - Y-Achse Servo-Motor 2 x 1,0 kW - Gesamtleistung 11,4 kW - Spannung 400 V, 50 Hz - 2 pneumatische Werkstückspanner - automatische Gleitmittelpumpe - C...
Minimax ti 55es LL - spindle moulder Figure shows 55 i T s standard version elite The professional craftsman machine with Swivel Milling spindle and 4 speeds. M Digital: motorized height adjustable and Tiltable Stable steel-cast iron construction Large dimensioned milling unit of grey cast iron, swivel up to 45 ° to the rear Display of the cutting speeds by LEDs Quick and easy change of speed of eccentric tension Right left rotation Display height and inclination 1/10 mm exactly Shaper fence he...
combined dovetail routing / drilling machine for the simultaneous processing of two frame corner parts per cycle up to dovetails and 2 dowel connections per corner working capacity up to 60 cycles/h workpiece height 10 - 120 mm, work piece width min. 10 mm working stations: 2 x milling cutters, motor 530 Watt (chock for HOFFMANN dovetail tool seize W1 – W3) 2 x drilling aggregate, horizontal, motor 2,2 kW, shaft DM 8 mm 2 x drilling aggregate vertical, motor 1050 Watt, shaft DM 8 mm foot...
Chain mortiser, chain milling machine, lock case milling machine, lock case mortising machine Vrwkvzk -Thread clamping -with: slot drilling machine -Connection: 380 volts -Dimensions: 1200/900/H1950 mm -Weight: 430 kg
- new- manufactured by Ruwi type M Basis 3 Technische Daten: - infinitely variable rotation speed control v. 8000 - 25000U/min - Regelelektronik verhindert Drehzahlschwankungen unter Last - Überlastschutz and PTC-Thermo-Überwachung - robuster and hochbelastbarer motor with 1050 W Bzwiyfr for den industriellen Dauereinsatz - Made in Germany - Sanftanlon and Anlaufstrombegrenzung - clamping 230 V - milling spindle with 22 mm diameter and gegen- läufigem Rückfördergewinde zur Schmutzabwehr, pr...
Double sided mitre fence for fast and stepless production of mitre cuts on narrow and short narrow and short workpieces at any angle from 0° to 90°. for cutting to length up to 1375 mm easy handling and quick mounting on the rolling carriage of the saw suitable for Panhans models 680_10_20 conversion kit for other models on request Bbyst9070 availability: short term Storage location: Hochheim
Technische Daten: - max. Arbeitsbreite 300 mm - max. Arbeitshöhe 250 mm - max. Frästiefe 70 mm - Tischgröße 800 x 800 mm - vertikale Frässpindel Durchmesser 40 mm - Frässpindel Länge 300 mm - max. Werkzeug Durchmesser 250 mm - doppelte Lagerung der Frässpindel - Motor 7,5 kW - Spannung 400 V / 50 Hz - Drehzahl 2900 U/min - 2 Hydraulische Materialspanner Bhhh7909jh - hydraukischer Vorschub mit Führungen in gehärteten Rundstangen - Hydraulik Aggregat 1,5 kW - Hydrauliktank 90 l - Fußschalter für S...
CASADEI F 25 LL FK - spindle moulder with pivotable Milling spindle and table extensions Spindle moulder with Swivel spindle from 45 ° to + 45 ° Stable steel-cast iron construction Dynamically balanced milling unit at the desk anchors Especially robust construction A quiet run through precision units and high weight Standard with right left rotation and electronic locking with change of direction 5 speeds by 3000-10000 min-1 The speed change is easily and conveniently from the machine side Equi...
- NEW - Description: - With aluminum slide and rigid milling spindle - Smooth sliding carriage for a precise Work guide - Milling fence with finely adjustable aluminum stops - Fast and easy change of the speed by means of much belt - Large work surface with torsion-free gray cast iron table - Milling unit made of gray cast iron - Hold-down for accurate workpiece guidance Delivery: - substructure - Spindle protection - Milling stop - Milling spindle with collet Technical specifications: Leng...
used precision milling stop made of cast aluminium with stop jaws made of grey cast iron with fine adjustment on both sides suitable for holding aluminium splinter tongues and valley board suction socket 120 mm availability: short term location: Hochheim Bxt92jeyjr
Brand: Waco Type: FA3MP Machine no: 236348 Year of manufacture: 1957 Pmvon Including feeding unit Holzher Tec. info: Right/Left spindle rotation Spindle speeds: 2500/3900/7850/3200/5000/10000 r/min Size for transport: 120x125x180 cm Stock no: 2000447
AUTOMATIC CUTTING , BORING and MOULDING machine type BALESTRINI FTA second hand machine Machine suitable for assembling part of chairs, tables, frames, small furniture, wheelchair frames, etc. The BALESTRINI FTA 000 performs the operations of Cutting , milling and drilling at the end of the piece, either singularly or differently combined. All movements of the machine are controlled by pneumatic devices. the carriage is hydraulic , so as to obtain a perfect and harmonious movement of the carr...
cleaned, function checked, test run Runout: 3/100 mm Bn0pjj9ur2 with glazing bead cutting saw with feed device used, good condition Make Guilliet Type QFP Year of construction 1991 Machine no. ROM 8102 V 1188 9 kW motor reinforced incl. feed with 4 rollers Speed levels 3 / 4.5 / 6/8000 Milling arbor diameter 50 mm Clamping height 270 mm Storage location from location Delivery in the current condition as seen Technically tested, without overhaul. Unpacked. - free on truck -
Second-hand machineYear of construction: 2000Copying undercutting machineOutreach: 500 mmMachine area: 910 x 600 mmSpindle drive motor 2.2 kW, 230 VMechanically operated spindle stroke via foot pedalTurret depth stop with three positionsRequired extraction capacity: 500 m³/hmax. workpiece thickness: 100 mmWeight: approx. 160 kgAvailability: at short noticeLocation: Hochheim Bxt2pz8pk7
AUTOMATIC CUTTING, BORING and MOULDING machine BALESTRINI I2F second hand Machine suitable for assembling part of chairs, tables, frames, small furniture, wheelchair frames, etc. The BALETRINI I2F performs the operations of Cutting , milling and drilling at the end of the piece, either singularly or differently combined. All movements of the machine are controlled by pneumatic devices machine composed by 3 working units : 1- Cutting unit circular saw diam. mm.350 motor power hp 3 2- Boring un...
Handrail clamp for gluing handrails from J. KNEZ very good condition, like new we sell this article on behalf of a customer, you will get a private purchase receipt, no VAT will be charged with it handrails can be pressed and glued together at mitres for material thickness up to 85mm Bwjvz9ovge with rubber coating the handrail clamp was only used for a few stairs and is still like new professional device, no hardware store scrap works perfectly
Drill head, drill bit, milling cutter -1x recording drawing with the photos -Mill 5x: Ø 16 x 40 carbide tipped -Cutter 2x: Ø 15 x 40 carbide tipped -Cutter 2x: Ø 14 x 40 carbide tipped -Cutter 2x: Ø 12 x 40 carbide tipped -in wooden box -Dimensions: 250/175/H75 mm -Weight: 2.7 kg Itubvcs2
- NEW - description - Stable cast steel construction - Milling spindle can be swiveled backwards from 0 ° to -45 ° - Three spindle speeds from 3500 - 10000 rpm - As standard with right-left rotation of the milling spindle - Large-sized milling unit made of gray cast iron, attached directly to the table - Solid and precise gray cast iron table - Quick and easy speed change - Powerful 5.0 kW industrial motor - Standard curved milling protection hood Equipment details Aluminum sliding carr...
SPINDLE MOULDER type SAC SUERI TS 130 B9uptpv second hand CE mark : YES electrical inversion of the direction of rotation self-braking motor fixed shaft with AIGNER system electric lifting of shaft with digital display 2 speed motor Hp 7 / 8,5 n.10 rotation speed of shaft from 1500 to 10.000 rpm shaft diam. mm. 30 interchangeable shaft diam. mm. 45 volt. 380/50
Turning plate window milling set OPPOLD CUTCROSS IV 68/78 Bxzb0gvjva very good condition, as good as new we sell this item on behalf of a customer, you will get a private bill of sale, there will be no VAT charged the cutter set is not complete consisting of 7 double seam and slot milling heads to each milling head you get a detailed drawing, in addition you get some window profile drawings with exact measurements all milling heads are for a 50er spindle or admission the carbide inserts for the ...
Chain mortiser, chain milling machine, lock case milling machine, lock case mortising machine -Table can be moved electrically -Connection: 380 volts -Motor power: 2.2 kW -Clamping: pneumatic Cfpyyyj
second hand Make Aigner Position 22 Protective cover for cutters up to 145 mm in diameter. The transparent protective cover always guarantees the view of the workpiece and tool. Storage location 97447 Gerolzhofen Puw7om Handover as is as viewed without guarantee and warranty
Used machine Year of manufacture 1981 Condition: workshop overhauled with 2-fold lifting spindle pneumatic mandrel diameter 40 mm with large table 2500 mm with extendable frame support with milling fence with Panhans metal stop jaws and fine adjustment pictures show machine in not yet overhauled condition Cko02df2 Availability: short term Location: Röllbach
SPINDLE MOULDER type SAC SUERI TS 120 second hand CE mark : YES electrical inversion of the direction of rotation self-braking motor fixed shaft with AIGNER system motor power Hp 5,5 rotation speed of shaft 3000 / 4500 / 6000 / 8000 / 10.000 rpm shaft diam. mm. 30 volt. 380/50 Bxagptzkqk
Catalog number 6272 TECHNICAL DATA Vertical milling machine: - spindle diameter 50mm - working height of the spindle 280mm - max tool diameter 200mm - 6kW engine - automatic spindle movement forward / backward, right / left - control from the desktop Vertical milling machine: - spindle diameter 50mm - working height of the spindle 280mm - max tool diameter 200mm - 6kW engine - diameter of the extraction nozzle 200mm - automatic spindle movement forward / backward, right / left - control from th...
Table milling machine, table milling machine E83zqrv -Table milling machine: with rigid spindle -Speeds: 3000/6000 rpm -Drive: 2.2/3 kW -Tool: Ø max. 240 mm -Spindle: Ø 30 mm -Milling protection device: with positioning device -Dimensions: 1000/1000/H1100 mm -Weight: 640 kg
second hand Make Haffner Bybw9mfoxa Type SL 100 Year of construction approx. 1987 Machine no. 3787 Chain set 16 x 40 x 150 Door overlay Pusher hole motor Cuff motor Lubricator mechanical workpiece clamping 2 x Space requirement approx. 1000 mm x 800 mm x 1800 mm Weight approx. 350 kg Storage location 97447 Gerolzhofen, free on truck, unpacked Handover in the current condition as viewed, without overhaul, without guarantee and warranty
Used machine Year of manufacture: 1993 Condition: workshop checked rigid milling spindle; new bearings with table extension with extendable frame support 2500 mm motor 5,5 kW speeds 3000/4500/6000/8000/10000 rpm Milling fence with 3 adjustment possibilities Suction hoods 120 mm aut. Motor brake Right-left rotation with Haffner feed with 4 rollers Weight approx. 700 kg Bbu8mvizu Availability: by arrangement location: Hochheim