Drill systems Offers
Bentonite mixing plant, bentonite mixing device, bentonite mixer, mixing/injection technology, injection system, injection pump, bentonite pump -2x: agitator -2x mixing container: Ø 1500 x 1500 mm (a 2m³) -2x injection pump: 80-100 l/min - Manufacturer: NEMO pump Jiafbib -Type: NM053SY04S24K -Speed: adjustable -Control -2x: VMT monitoring -Type: OptiFlux 5300 C -div. Hoses -Connection: NW50 -2x: filling funnel on container -Dimensions: 2435/6250/H2770 mm -Weight: approx. 4000 kg
We are ACCEPTING OFFERS for this unit!Buying with Equippo is easy: • Fully inspected machines • Delivered to your jobsite • Money Back Guaranteed • Safe payment methods with possibility to pay at delivery 2014 - Atlas Copco ROC F9-CR | Used Rock Drill with capability of 90-127mm hole range with 30m max drilling depth, 115mm rods (Included with purchase) with 20m drilling depth, rod carousel, air compressor, dust collector, auto-lubrication, and Cat C9 engine CE marked: Yes EPA marked: No 55 I...
MAIT HR 180 Weight: 57 - 60 tons Year of manufacture: 2019 operating hours: 1168 nom. Torque: 233 kNm max. drilling diameter: 2000 mm drilling depth: 30 - 60 m SOB method: max. drilling diameter: 1200 mm Drilling depth: 19 + 5 m diaphragm walls: length x width: 1000 x 3000 mm Drilling depth: 32 m Bx08lvbief Jet Grounding: Drilling depth: 32 m Atlas Kompakt OWL Representative office of MAit in Germany, Austria and Switzerland. MAIT has been producing large drilling rigs, well drilling rigs, cable...
**Wick Drain Stitcher ZWD 20** Pa70n Year of manufacture: New - Wick Drain installation depth 20 meters - Pole height 23 meters - Pulling force 321 kN - Pulling force 195 kN - Speed pulling force 0,60 m/sec - weight 14.500 KG - suitable for chain excavator 45 to 60 to. Input errors and mistakes in this offer are expressly reserved. Only the concrete agreements in the order confirmation or in the sales contract are decisive. more construction machines and mixing plants on our website
Control container, control container, control cabinet Grsbp3x -Control cabinet for tunneling -comes from Lemme Berlin -for bentonite pumps -Control panel -SPS control -Dimensions: 600/350/H1320 mm -Weight: 60 kg
MAIT HR 260 Operating weight: approx. 75 tons nom. Torque: 260 kNm Bx0y2q0lfw max. diameter uncased: 2600 mm max diameter piped: 2000 mm max. drilling depth 80 m The machine is equipped with a diaphragm wall kit. Slot length and width 1200 x 3000 mm, drilling depth 30 - 50 m.
**ABI ZR 400 GL RAMMING DEVICE** year of manufacture: 1988 Operating hours: 7.135 - carrier O&K RH 12 - ABI ZR 400 GL pile driver - centrifugal force 400 kN Cvrg8egq - Stat. moment 4,1 kgm - Tractive force 180 kN - Frequency 44,2 Hz - Driving power 80 kW - Deutz engine , 172 kW / 234 PS - weight 45 to. - very good condition Input errors and mistakes in this offer are expressly reserved. Decisive are only the concrete agreements in the order confirmation or in the purchase contract. more machines...
working range 3.000mm / width of machine 5.250mm, height 2.200mm, height of rail 650mm, table height 700mm, rail length 6.000mm, max cuting thickness: with 1 burner 3-200mm / with 3 burners 3-100mm, cutting speed 100-8.000mm/min (0-120%), rapid travel 20m/min, 2 burners Iqzffqp3g
Very good price and terms! Drillmec MR 8000 set 2017 year of manufacture is for sale in Russia. Condition - new, but incomplete - without top drive. 0aacyh9x Ready for delivery to any country. Detailed information is available upon request.
Our company is based in Lithuania, European Union. We produce wide range of Horizontal directional drilling parts, including reamers, adapters, starter rods, housing, trihawk drill heads, swivels and other parts for Ditch Witch, Vermeer, Tracto and other machines All parts are made from HARDENED high strength steel, HARDOX plates, wear resistant material, such as tungsten carbide. All parts are made in European Union. Blhhnd92hl
**TRACTOTECHNIK GRUNDODRILL 10S** year of construction: 1999 Operating hours: 3.400 - expansion: max. 385 mm - max. torque: 2500 kN - tractive force 96 kN - compressive force 65 kN - max. drilling length 250 m - drive power: 90 kW - drill rods and drill heads included - complete equipment with separate drive motor, hose package and large tank for drilling fluid solution Clsjhmv Input errors and mistakes in this offer are expressly reserved. Only the concrete agreements in the order confirmation...
X/Y/Z/W 15.000 / 4.000 / 800 / 700mm, ram 325 x 325mm, spindle dia 160mm, ISO 50 / 2.5 - 1.250 rpm / 65/40kW, 2 rotary tables (B-Axes) 1.600x2.000 + V1-travel 2.000mm (25to) / 2.000x2.500 + V2-travel 2.500mm (40to), 60-Pos ATC, 3-Pos Head-Magazine, coolant unit, chip conveyor, LxWxB, ca. 22x11x8m (over floor), weight, ca. 132to Pgrrl
Our company is based in Lithuania, European Union. We produce wide range of Horizontal directional drilling parts, including reamers, adapters, starter rods, housing, trihawk drill heads, swivels and other parts for Ditch Witch, Vermeer, Tracto and other machines Omnyb All parts are made from HARDENED high strength steel, HARDOX plates, wear resistant material, such as tungsten carbide. All parts are made in European Union.
**BOHAK KL 200 DRILL * NEW *** year: 2018 Truck: Iveco 4x4 used (drilling rig can also be built on new Iveco Trakker) Mast height 6 meters. drilling depth: approx. 200 meters tractive force 8 to. new separate drilling machine engine Perkins 6 cyl. diesel new Caprari MEC 3-80A mud pump Air compressor 10 bar 1 year warranty This machine has enough power to pull out the drill rods and does not require a winch. If you want to have a separate winch, the price is 7.500 EUR extra ----- (Input errors an...
Brand: Ditch Witch Type: JT2020 MACH1 Year of construction: 2011 Engine: 4 cylinder Turbo Cummins 60kW Bwppeleep9 Hours on display: 5484 Stocknr.: BN1569 Horizontal drilling machine Automatic drilling magazine Approx. 45 drill rods Water pump Hydraulic Outriggers Rubber Tracks Weight 5260kg CE certified
Horizontal directional Drill Vermeer D7X11 Series II Navigator Demo machine - 451 w.hours ADDITIONAL EQUIPMENT: MIXER VERMEER MX125 LOCATING SYSTEM – DIGITRAK MARK III DRILL RODS – 38 PCS, D 42 ММ, L 1.80 М NEW DRILLING EQUIPMENT – STANDARD DRILL BIT, DRILL HEAD, STARTER ROD, REAMER COMPACT Ф150 ММ /TUBES Ф90-125 ММ/, DRIVE CHUCK WITH SUB SAVER /Ф92-105 ММ/, HEX COLLAR Ytyvt0
Year Rig: 1999 Base carrier: Mercedes DB 1824 Power head type: KSP 7 Mud Pump: Stork NU25-10 DSB 2 /10 Mast length: 9200mm Travel: 6800mm max. hook load: 120kN max. hydr. Pull down: 3500daN Bv3gb7rgrn hydr. Jip / swivelling range: 800mm max. load: 1000daN Mast food with hydr. Clamp: 324 - 416 mm Hydr. power head / Rotation speed righ / left, KSP 7-10 Troque: 1050 / 650 / 230 daN Speed: 0 -85 / 0 - 120 / O -320 U/min Passage: DN 172mm
Our company is based in Lithuania, European Union. We produce wide range of Horizontal directional drilling parts, including reamers, adapters, starter rods, housing, trihawk drill heads, swivels and other parts for Ditch Witch, Vermeer, Tracto and other machines All parts are made from HARDENED high strength steel, HARDOX plates, wear resistant material, such as tungsten carbide. Hzckgu0x8 All parts are made in European Union.
**Ditch With JT 2320 Drill Rig ** Year of manufacture: 1996 Operating hours: 3.337 max. torque: 1762 Nm tractive force: 104 kN pressure: 93 kN max. Diameter ø 360 mm Rh8qsn7b Engine: 43 kW Weight: 4082 kg more construction machines, mixing plants and utility vehicles on our website
Control container, control container -Control container comes: from Lemme Berlin -Control container for: a tunnel boring machine with the type MH2-SV-47 Librx -Documents and technical drawing: available -Control container for: tunneling -Control cable -Control panel -Video monitoring of the segments (without cameras) -Dimensions container: 3100/2400/H2800 mm -Weight: approx. 1500 kg
Brand: Kubota Type: KC250H Year of construction: 2010 Engine: Kubota 4 cylinder Hours on display: 838 Stocknr: BN1529 Mab-rudebeul Pile driver Hydraulic hammer Remote control with cable Hn9duf3sc Side shift Hydraulic tilt adjustment Hammer hydraulically adjustable front / rear Reversing device Very suitable for solar panels CE certified Weight approx. 3.500kg
**CASAGRANDE C 14-I DRILL ** year of construction: 2004 Operating hours: 650 New Deutz engine with 650 Bh - Powerhead Hydraulic T 1600 and Chuck - 3x heavy mast extensions each 5 meters - 1x light mast extension each 3 meters Bumekwusjv - Weight: 33400 KG Input errors and mistakes in this offer are expressly reserved. Decisive are only the concrete agreements in the order confirmation or in the sales contract. more construction machines and mixing plants on our website
Mast Length: 18.8 m Type: Exploration Drill Rig, Water Well Drilling Rig Motor Type: KHD F121413F Hoisting Force: 127 kN Regulary Hook Load Capacity: 100 t Accessories not included in the price: - two trailers, each loaded with 21 Wirth double-wall screwable reverse-circulation 9 m drill pipes of outer Ø 311 mm and inner Ø 211 mm. Cftwyaj - 1,300 m of 5" x 4-1/2" IF API R II Drill Pipe - three Drill Collars - Drill Pipe Handling Unit for mounting and dismounting of drill pipes - two Wirth ...
Oxygen station -for: portable oxygen breathing apparatus for tunneling -for: Herrenkecht tunnel boring machine -in: aluminum case -in: protective container -Dimensions: 1400/1060/H3300 mm -Transport weight: 260 kg Bws8bnh
♻️ Hydraulic auger with planetary gear for excavators and built-on excavators ♻️ Bmfgtn3hn3 The drill can run clockwise and counterclockwise. It is equipped with a double joint and machine mounting. *** Technical data *** drill head: 150 mm - standard diameter: 370 mm Length of holder: 950 mm spindle length: 1000 mm Weight: 250 kg min. hydraulic output: 60/90 l/min hydraulic pressure: 300 bar Max. torque: 10,000 N/m Optional accessories: ✅ Double-acting valve: Enables the use also on carriers w...